Akrilni premaz Proizvodnja antikorozivne boje na vodenoj bazi Brzo sušenje, jednostavna gradnja.
primjena
Brzo sušenje, jednostavna gradnja.
Preporučena upotreba Koristi se za razne vrste bojanja čeličnih konstrukcija. Uključuje velike čelične konstrukcije, vanjske čelične dijelove, mrežaste okvire, metalne ograde zajednice, razne vrste dijelova od lijevanog željeza i druge metalne proizvode itd. Može se koristiti i za održavanje i popravak ukrasa.
Technical parameters Color various colors Surface dry (50% humidity) 15'℃ C<th i 25 ℃<0.5h gloss 20%-60% (adjustable) Solid dry (50% humidity) 15 ℃ C<48h; 25 ℃ C<24h
Adhesion (Bacchus method) Grade 1, Zero Curve 1mm
Impulse 50kg.cm
Surface treatment The surface to be painted must be clean, free of moisture, acid and alkali, and no oil stains.
Steel with oxide skin: treated to Sa2.5 by blasting or sandblasting, and where sandblasting is not possible, mechanically sanded or chemically treated to remove all floating broken shoulders.
Quick Details
Steel without oxide skin: sandblasted to Sa2.5 or sanded to St3 with air or electric grinding tools.
Welding, flame-cutting or pyrotechnically correcting burnt parts: beaten to St3.
Base material with old paint film: remove the loose old paint film and rust, and sand to St3 level with air or electric sanding tools.
Construction data Ventilation conditions, temperature, paint thickness and other factors will affect the drying time accordingly, the typical data listed is based on the following conditions Re-coat after drying, or wet mix until the paint (paint should not hang).
Recommended number of coating courses 1 course 20-30 μm, 2 courses dry film 40-60 μm
The above data is for guidance only. The specific repainting time may be longer or shorter, depending on humidity, particle thickness, ventilation, loading requirements and mechanical strength requirements.
Caution and other data are the same as for "H901 waterborne antirust paint", please refer.
Pojedinosti o proizvodu
|
Classification |
1K Basecoat |
|
Features |
Magnificent optical effect, high gloss |
|
Substrates |
Existing finishes, 2k & 1k intermidiate primer |
|
Color |
Superfine Silver |
|
Packing |
1L*12 cans |
|
Sample Time |
Within 3 days |
|
MOQ |
100L |
|
Product Keywords |
acrylic raw material car 2k top color paint |
Features: It is high solid content and fast dry acrylic clear coat. Especially formulated for spray over 1K base coat to give very glossy finishing. Excellent yellow and weather resistant. Outstanding flow, leveling and anti-scratch. Good thick film and clear appearance.
Technique data sheet:
|
NO. |
Test Item |
Quality Datas |
|
1 |
Item No. |
ES950/980 |
|
2 |
Product name |
High Solid Clear Coat |
|
3 |
specific gravity(KG/L) |
0.95±0.05 |
|
4 |
Viscosity |
35-45 Seconds |
|
5 |
spray pressure(MPA) |
3.0-3.5kg/cm² |
|
6 |
Solid content |
56% |
|
7 |
Ratio(clear coat:hardener:thinner) |
100:30:(15-25) |
|
8 |
Skin dry time (25℃) |
45 mins |
|
9 |
Fix time (25℃) |
12 hours |
|
10 |
Glossy(60°℃) |
98 |
|
11 |
Shelf life |
2 years in original sealer can in cool and dry place at 20℃. |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
